An error message may be displayed on the LCD during printing.
Ink has run out. See “The following ink has run out. Replace the ink tank.” in “An Error Message Is Displayed on the LCD” on page 70 and take appropriate action.
(B)
(B) Empty ink tank.
zWith the Ink Lamps
You can confirm the status of each ink tank by the ink lamps. Open the Scanning Unit (Printer Cover) of the machine to confirm how the ink lamps light or flash.
zInk lamp is on
The ink tank is correctly set and there is enough ink remaining to print.
zInk lamp is flashing
Flashing slowly (at around
......Repeats
Ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.
Flashing quickly (at around
......Repeats
The ink tank is inserted in the wrong position or it is empty. Ensure that the ink tank is in the correct position as directed by the label on the Print Head Holder. If the position is correct and its lamp flashes, it is empty. Replace it with a new one.
zInk lamp is off
The tank is not set properly. Press the 
mark on the ink tank until the tank clicks into place. If it does not click into place, make sure that the orange protective cap has been removed from the bottom of the ink tank. See “Prepare the replacement tank.” on page 49.
If the lamps are still off after reinserting the ink tanks, there has been an error and the machine cannot print. Check the error message displayed on the LCD. See “An Error Message Is Displayed on the LCD” on page 70.
Routine Maintenance | 47 |