E
Appears immediately after you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears. ( 
140)
HEADS DIRTY,
USE CLEANING CASSETTE
Appears if you have tried to mark 51 or more images for printing, or if a mark file cannot be edited. ( 
114)
A memory card has not been inserted into the camcorder. ( 105)
PRINT MARK ERROR
NO CARD
Memory card caution phrases
An error has occurred with the memory card. The camcorder can not record or play back. A temporary card error is also possible. If
CARD ERROR disappears after 4 seconds
and 
flashes red, turn the camcorder’s power off and back on again, and remove
and reinsert the card. If 
flashes green, recording or playing back is possible.
There are no images recorded on the memory card.
You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch.
NO IMAGES
THE CARD IS SET FOR ERASURE PREVENTION
There is no more remaining memory
on the memory card.
Change the card or CARD FULL erase images.
| You have reached the |
| |||
| maximum file or |
| |||
| folder number. | NAMING ERROR | |||
| ( |
| 107) | ||
|
| ||||
| The image has been |
| |||
|
| ||||
| recorded in an | UNIDENTIFIABLE | |||
| incompatible JPEG | ||||
| IMAGE | ||||
Additional Information | format or other | ||||
| |||||
format that the |
| ||||
|
| ||||
camcorder can not play back, or the image data has been damaged.
Appears when you press the start/stop
button in CARD
CAMERA mode. IN CARD POSITION The image isn’t
recorded on the cassette or memory card.
