![](/images/new-backgrounds/1179068/179068201x1.webp)
Setting the Audio Mix
POWER
CAMERA
OFF
PLAY(VCR)
E
MIX
AUDIO BALANCE
MONITOR
When you play back a tape that was recorded in
•Audio from the
PLAY
TAPE + (VCR)
1.Choose the output.
•Press AUDIO MONITOR on the wireless controller.
•Starting with the last selected setting, 4 settings appear as you push the button:
–STEREO1 for just stereo 1.
–STEREO2 for just stereo 2.
–MIX/FIXED for an equal mix of stereo 1 and 2.
–MIX/VARI. (mix variable) for when you want to mix the balance between stereo 1 and 2.
•To simply choose STEREO1, STEREO2 or MIX/FIXED, make sure your choice appears on the display.
•If you choose MIX/VARI., you can go on to mix the balance.
•Use the
Note:
•When you have chosen the output, STEREO1, STEREO2, MIX/FIXED or MIX/VARI. is shown in the top left of the display for a few seconds. If you turn the power off the output is set to STEREO1.
Editing