Canon MV800 Using a Household Power Source, Turn the POWER switch to OFF, power adapter, outlet

Using a Household Power Source

Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed.

E

1.	Turn the POWER switch to OFF.
2.	Connect the power cord to the
	power adapter.
3.	Plug the power cord into a power
	outlet.
4.	Connect the power adapter to the
	camcorder’s DC IN terminal.
	Turn off the camcorder before connecting or disconnecting the power adapter.	Preparations	Basic Functions
	If the adapter is used close to a TV, it may cause picture interference. Move the
	adapter away from the TV or the antenna cable.
	Do not connect any products that are not expressly recommended to the
	camcorder’s DC IN terminal or to the power adapter.
	You may hear some noise from the power adapter during use. This is not a
	malfunction.
	Do not disconnect and reconnect the power cord while charging a battery pack.
	Charging may stop. The battery pack may not be charged correctly even if the
	CHARGE indicator glows steady. The battery pack may also not be charged
	correctly when a power outage occurs during charging. Remove the battery
	pack and attach it back to the camcorder.

When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops.

The CHARGE indicator informs you about the charge status. 0-50%: Flashes once every second

More than 50%: Flashes twice every second

100%: Glows steadily

11