Canon MV790, MV800i Playing Back a Tape with Added Sound, 12bit AUDIOSTEREO1, Menu, Audio Setup

Playing Back a Tape with Added Sound

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds.

	CAMERA		PLAY (VCR)
MENU
		AUDIO SETUP		12bit AUDIO•••STEREO1
(	34)

E

1.Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO], select a setting and close the menu.

•STEREO1: Plays back the original sound.

•STEREO2: Plays back the added sound.

•MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.

•MIX/VARI.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.

2.If you have selected [MIX/VARI.], adjust the mix level: Open the menu and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance with the SET dial and close the menu.

Turn the SET dial down to increase the volume of Stereo 1 and up to increase the volume of Stereo 2.

The camcorder resets to [STEREO1] when you turn the camcorder off.

However, the mix balance is memorized by the camcorder.

Audio dubbing cannot be performed with your camcorder.

Playback	Advanced
	Functions

63