Canon MVX20i, MVX25i instruction manual Installing the Backup Battery

Installing the Backup Battery
The backup battery allows the camcorder to retain date, time (	19) and other
		E
camcorder settings while the power source is disconnected. Connect a power source to

the camcorder when replacing the backup battery to retain the settings.

1.Open the terminal cover.

2.Open the backup battery cover.

3.Insert the lithium battery with the + side facing outward.

4.Close the backup battery cover.

5.Close the terminal cover.

w	e	r
		Basic Functions Preparations
		-
		q t

WARNING!

•The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100 °C or incinerate the battery.

•Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo, or with Duracell2025. Use of other batteries may present a risk of fire or explosion.

•The used battery should be returned to the supplier for safe disposal.

❍Do not pick up the battery using tweezers or other metal tools as this will cause a short circuit.

❍Wipe the battery with a clean dry cloth to ensure proper contact.

❍Keep the battery out of reach of children. If it is swallowed, seek medical assistance immediately. The battery case may break and the battery fluids may damage stomach and intestines.

❍Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.

The backup battery has a life span of about a year. “j” flashes in red to inform you that it needs to be replaced.

15