Canon MVX20i Turn the SET dial to select Print and press the SET dial, Reconnect the cable, 125

3.Turn the SET dial to select [PRINT] and press the SET dial.

•Printing starts. The print setting menu disappears when printing is complete.

•If you wish to continue printing, select another still image with the CARD +/– button.

❍Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not open the memory card cover or remove the memory card.

❍Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.

❍If the message “BUSY” does not disappear, disconnect the cable from camcorder and printer and reconnect the camcorder to the printer.

❍Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK] and press the SET dial.

-Canon Bubble Jet Printer: Printing stops even if it is incomplete and the paper is fed through.

-Canon CP-Printer: A print in progress cannot be stopped. Printing stops when the current print is finished and the remaining prints are cancelled.

❍Printing Errors

If an error occurs during the printing process, an error message appears ( 144).

-Canon Bubble Jet Printer: Resolve the error. When printing does not resume automatically, select [CONTINUE] and press the SET dial. If [CONTINUE] cannot be selected, select [STOP], press the SET dial and retry printing. Refer also to the printer manual for details.

-Canon CP-Printer: Select [STOP] or [RESUME] and press the SET dial. (The [RESUME] setting may not appear with some error messages. In that case, select [STOP].) Refer also to the printer manual for details.

-If the error still persists and printing does not restart, follow below procedure:

1.Disconnect the cable.

2.Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).

3.Reconnect the cable.

❍When you have finished printing:

1. Disconnect the cable from the camcorder and printer.

2. Turn off the camcorder.

E

Direct Printing

125