Canon MVX25i Press the Audio DUB. button on the wireless controller, Audio DUB. and a appear

5.Press the AUDIO DUB. button on the wireless controller.

“AUDIO DUB.” and “ a” appear.

6.Press the PAUSE a button on the wireless controller to begin dubbing.

•Microphone: Speak into the microphone.

•Audio device: Begin playback.

7.Press the STOP 3 button on the wireless controller to stop dubbing.

Audio device: Stop playback.

ZERO SET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
		AV	DV	REMOTE SET
ZERO SET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
		AV	DV	REMOTE SET
ZERO SET	REW	PLAY		FF
MEMORY
12bit		STOP
AUDIO OUT
AUDIO DUB.	PAUSE	SLOW		2
		AV	DV	REMOTE SET

❍Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or 16-bit mode.

❍When using the built-in microphone, do not connect any devices to the MIC terminal or the advanced accessory shoe. When using the DM-50 Directional Stereo Microphone, do not connect any devices to the MIC terminal.

❍You cannot use the DV terminal for audio dubbing.

❍If you add sound to a tape not recorded with this camcorder, sound quality may decrease.

❍Sound quality may decrease when you add sound to the same scene for more than 3 times.

❍When you connect an audio device, check the picture on the LCD screen and the sound via built-in speaker or audio device. You can also connect a TV via S- video terminal.

❍When you use the built-in microphone, you can either connect a TV via AV terminal to check the picture, or headphones to check the sound. When you connect a TV via S-video terminal, you can check the picture on the TV screen and the sound with headphones connected to the camcorder.

❍Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.

90