Canon MVX20i, MVX25i Recording from a Tape in the Camcorder, Recording from Other Video Devices

Recording from a Tape in the Camcorder

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY

1.Play back the tape.

2.Press the PHOTO button halfway when the scene you wish to record appears.

•The camcorder pauses playback. The remaining image capacity and other information appear.

•When you press the PHOTO button on the wireless controller, recording starts immediately.

3.Press the PHOTO button fully.

•The card access indicator flashes.

•You can also record a still image by pressing the PHOTO button fully when the tape is in playback pause mode.

Recording from Other Video Devices

You can record images from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as still images on a memory card.

For connecting instructions, refer to page 32 and 82.

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY

E

1.Set the camcorder to PLAY (VCR) mode.

•If a cassette is loaded, make sure that the tape is stopped.

•When recording via the AV terminal, make sure that “AV\DV” is displayed on the screen. When recording via the DV terminal, make sure that “AV\DV” is not

displayed. Change the setting as necessary ( 88).

2.Connected device: Load a recorded cassette and play back the tape.

3.Press the PHOTO button halfway when the scene you wish to record appears.

•The still image, remaining image capacity and other information appear.

•When you press the PHOTO button on the wireless controller, recording starts immediately.

4.Press the PHOTO button fully.

The card access indicator flashes.

Using a Memory Card

99