Canon MVX20i Wind Screen, Using Headphones during Recording, Adjusting the Headphone Volume

Wind Screen

The camcorder reduces wind noise automatically. However, you can turn off the wind screen when recording indoors, or when you want the microphone to be as sensitive as possible.

E

CAMERA PLAY (VCR) *

*Only when [AUDIO DUB.] is set to [MIC IN].

CARD CAMERA CARD PLAY

( 36)

AUDIO SETUP

WIND SCREEN••AUTO

Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to [OFF] and close the menu.

“WS ” appears when you turn the wind screen off.

The wind screen function can only be used with the built-in microphone.

Using Headphones during Recording

The headphones terminal also serves as AV terminal. Headphones can only be used when “H” is displayed on the screen. If not, change the setting following the procedure below.

CAMERA		PLAY (VCR)	CARD CAMERA	CARD PLAY
	VCR SETUP		AV/PHONES	••AV

( 36)

Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H ] and close the menu.

Recording	Advanced
	Functions -

Adjusting the Headphone Volume

CAMERA PLAY (VCR)

CARD CAMERA CARD PLAY

( 36)

AUDIO SETUP

HVOLUME•••••

Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the volume with the SET dial and close the menu.

You can turn off the volume completely by turning the SET dial down until [OFF] appears.

Turn the SET dial up to increase the volume again.

61