Canon MVX20i, MVX25i instruction manual 145, Message

Message	Explanation
READJUST TRIMMING	You changed the print style after you set the trimming settings.
PRINTER ERROR	Cancel printing. Turn off the printer and turn it back on. Check
	the printer status.		E
PRINT ERROR	Cancel printing, disconnect the USB cable and turn off the printer.
	After a while, turn the printer back on and reconnect the USB
	cable. Check the printer status.
	When you are printing using the	button, check the print
	settings.
HARDWARE ERROR	Cancel printing. Turn off the printer and turn it back on. Check
	the printer status.
RECHARGE THE	The printer battery is depleted.
PRINTER BATTERY
COMMUNICATION	The printer is experiencing a data transmission error. Cancel
ERROR	printing, disconnect the USB cable and turn off the printer. After a
	while, turn the printer back on and reconnect the USB cable.
	When you are printing using the	button, check the print
	settings.
	Or, you attempted to print from a memory card that contains a
	large number of images. Reduce the number of images.
CHECK PRINT	The print setting cannot be used for printing with the
SETTINGS	button.
PRINTER IN USE	The printer is in use. Check the printer status.
PRINTER WARMING	Printer is warming up. If the message does not disappear after a
UP	few seconds, check the printer status.
PAPER LEVER ERROR	Paper lever error occurred. Adjust the paper selection lever to the
	proper position.
PRINTER COVER OPEN	Close the printer cover securely.
NO PRINTHEAD	No print head is installed in the printer or print head is defect.
	Refer to the instruction manual of your printer.

Information Additional

145