Canon MVX20i, MVX25i instruction manual Memory Card Operation, Printing, 155

Memory Card Operation

	Problem	Cause	Solution
Memory card cannot be		Memory card was not facing	Turn the memory card over	93
					E
inserted.		the correct direction.	and reinsert it.
Memory card cannot be		Memory card is full.	Replace the memory card or	93
recorded.			erase images.
		Memory card is not	Format the memory card.	121
		formatted.
		Memory card is not inserted.	Insert a memory card.	93
		File number reached	Set [FILE NUMBERS] to	96
		maximum value.	[RESET] and insert a new
			memory card.
		SD Memory Card is	Change the position of the	93
		protected.	protect switch.
Memory card cannot be		Camcorder is not set to	Set the camcorder to CARD	112
played back.		CARD PLAY mode.	PLAY mode.
		Memory card is not inserted.	Insert a memory card.	93
Image cannot be erased.		Image is protected.	Cancel the protection.	115
		SD memory card is	Change the position of the	93
		protected.	protect switch.
“	” flashes red.	Card error occurred.	Turn off the camcorder.	121
			Remove and reinsert the
			memory card. Format the
			memory card if flashing
			persists.
Printing
The printer is not		The camcorder is set to	1. Set the camcorder to	–
operating even though		NETWORK mode.	CARD PLAY mode.
camcorder and printer			2. Disconnect and reconnect
are correctly connected.			the USB cable.
			3. Turn off the printer and
			turn it back on.

Information Additional

155