Selecting the Output Device | Canon N656U, N1220U, N650U specs

S T E P 1

Selecting the Output Device

Use the following procedures to select the output device (printer, etc.) for the scanned image. Select the device that corresponds best to your output device and use of the image.

Operating Procedures

Click the arrow on the [Output Device] section of the control panel and select a device from the pop-up menu.

Caution

• You can set the device categories in the pop-up menu in advance. You can also add new devices to the pop-up menu. See Setting Preferences (p. 25).

18

Image 18

Canon N656U, N1220U, N650U manual Selecting the Output Device

Contents

Users Guide How to Make Best Use of the Manuals When you open the box How to Use this Guide Where to LookAbout the Conventions Used in this Guide Table of Contents Adjusting Scanned Images Installing Plug-in Module CS-U Operating Environment Control Panel Features Image Size pp Scanning Procedures E P Gamma Curve Adjusts Image Brightness Plug-in Module CS-U Special FeaturesSee the Results of Adjustments Immediately Dynamic Preview ColorSync Ver 2.0 + Compatible for Auto Tone Correction Start Plug-in Module CS-U Install Plug-in Module CS-UQuick Start Instructions Position materials for scanning and preview them Click on the Browser button Selection frame will appear Verify Image Quality with the Browser Function beforeSpecify the Area of the Image to be Scanned Select the area to be scanned by clicking and dragging Scan the Image p Save the Scanned Image p E P Displaying the Plug-in Module CS-U Control Panel RGB Values Operating Procedures Procedures Positioning OriginalsPlace the original on the scanners document glass Previewing Click on the Preview button Selecting the Output Device Setting the Resolution and Magnification Output Device Resolution= 720 dpi, Magnification= 100% To Set the Magnification Factor Set the desired magnification factor on the control panel Grayscale Setting the Scan ModeBlack and White Color Documents Click the arrow beside Scan Mode Select a scan mode from the pop-up menu Verifying the Image before Scanning To Verify the Image Rotating the Image Use these buttons to rotate the image Setting Preferences Output DeviceAspect Ratio Unit Preview Window Reset Default Settings CalibrationClose Plug-in After Scan Operating Procedures Scanning Setting the Scan Area Position the pointer in the preview window Procedures to Zoom ZoomingSelect the area you want to enlarge with the zoom function Click on the Zoom In button Specify the Scan Area ScanningTo Initiate the Scan Click on the Scan button Saving Scanned Images Enter a name for the file and click the Save button Grayscale, Color Photos and Color Documents Black & WhiteColor Photos and Color Documents Tone Adjustment Tone Adjustment Dialog Histogram Settings How to Interpret Histograms To Adjust a Histogram How to Adjust Histograms Click on the OK button Shadow Mark Tone Curve Settings Manipulating the Graph To Edit the Tone Curve Click the OK button Relationship Between the Tone Curve Image Brightness Value = Brightness and Contrast Settings ContrastBrightness To Adjust the Brightness and Contrast Adjusting the Color Balance Operating Procedure Gamma Value Settings Matching the Gamma Value to the Display CharacteristicsGamma value To Change the Gamma Value Settings Adjusting the Threshold Value To Set the Threshold Value Standard Auto Tone CorrectionTo Set the Auto Tone Correction ColorSync Unsharp Mask Open the Image menu and select Unsharp Mask Descreen Open the Image menu and select Descreen Saving/Recalling Settings To Save Settings in a Settings FileClick the Save button To Recall a Settings File Matching Scan Resolution to Purpose Optical and Enhanced ResolutionsScanning Techniques Appendices Troubleshooting Problem Scan button cannot be selected Cause Error MessagesError Message Response Bits/Bit Numbers GlossaryAuto Tone Correction Black Eyedropper Tool Color Channel Dot Histogram Image FileMagnification Moiré Optical ResolutionResolution Pixel Threshold Value Scan ModeShadows Tone Curve Index Output device 7, 11, 18, 25Page Canon Customer Support Help Desk Canon Computer SYSTEMS, INC OE-040AA 052000 CDS Canon Inc