Canon S100 manual Charging the Battery Pack, Battery charger model names and types vary by region

12

Preparing the Camera

Charging the Battery Pack

Recharge the battery pack with battery charger CB-2L or CB-2LE the first time you use the camera or when the “Change the battery pack” message is displayed.

Battery charger model names and types vary by region.

CB-2L

AC Power Cord

CB-2LE

•Insert the battery pack into the charger as shown and plug the charger into an electrical outlet.

•The charging indicator will flash red while the battery pack is charging. It will change to a steady red when the charge is complete.

•After charging, unplug the battery charger and remove the battery pack from it.

•The battery pack utilizes lithium ion cells, avoiding the need to completely use or discharge the battery charge before recharging it. You may recharge the battery at any charge state without permanently reducing its capacity.

•It takes approximately 120 minutes to charge a battery pack fully from a fully discharged state. (Based on standard Canon testing conditions) Please charge it at an ambient temperature ranging between 5 and 40 ºC (41 and 104 ºF).

•Charge times may vary according to the ambient temperature and the charge state of the battery pack.

•To protect and prolong the life of the battery pack, do not charge it for longer than 24 hours at a time.