Canon SBOEX Fully Automatic Flash Shooting, Zoom SOmm 1 Set the Speedlite to ETTl

Fully Automatic Flash Shooting

When you set the camera'sshooting mode to <P> (Program AE) or <0> (Full Auto), E-TTL II/E-TTL fUlly automatic flash will make it as easy as normal AE shooting.

Zoom SOmm 1 Set the Speedlite to <ETTl>.

ru. ~ Press the <MODE> button so that <ETTL> is displayed.

0.5 0.7 1 1.5 2 3 4 6 9 13 18 m

ETTL Zoom SOmm

0.5 0.7 -------1 1.5 2 3 4 6 9 13 18 m

Focus the subject.

IS}, Press the shutter button halfway to focus. ~\}o The shutter speed and aperture will be set

as displayed in the viewfinder. Check that the < ~ > icon is lit in the viewfinder.

Take the picture.

~Check that the subject is within the effective range displayed on the LCD panel.

~A preflash is fired right before the shot is

taken, then the main flash is fired.

~> If a standard flash exposure was obtained, the flash exposure confirmation lamp will light for about 3 sec.

I.lJ 0 <ETTL> will be displayed on the LCD panel even if the camera is compatible with E-TTL II.

If the flash exposure confirmation lamp does not light, move closer to the subject and take the picture again. You can also increase the camera'sISO speed.

11