![](/images/new-backgrounds/1295613/29561383x1.webp)
Wireless Manual Flash with Varied Flash Output
With manual flash and multiple Speedlites, you can set a different flash output for each slave unit (group).
All settings are done with the master unit.
1m Zoom C''-:mm
M
M
M
....:>m C'L: mm
OFF~S '/ , _ | I | |
MAST | I | |
- | r06l~ | "'A~"'C |
| ~z 1 |
Press the <MODE> button so that
<M > is displayed.
Press the <ZOOM/~> button so that <liMitell> blinks.
Select the flash ratio.
{;~ Turn the <@> dial to select <A: B> or <A: B: C>, then press the <@> button.
Set the flash output.
r:ill; Press the <~> button.
The slave ID < A > will blink.
Turn the <@> dial to set the flash output for < A >, then press the <@> button.
The slave 10 < B> will blink. Turn the <@> dial to set the flash output for < B>, then press the <0> button.
iw The slave 10 < C > will blink. Turn the <@> dial to set the flash output for < C >, then press the <@> button.
9' All the slave IDs will light.
42