Using Fully Automatic Wireless Flash | Canon SBOEX specification

Using Fully Automatic Wireless Flash

Flash exposure compensation and other settings set with the master unit will also be automatically set in the slave units. Thus, you need not make settings on the slave unit(s). Wireless flash with the following settings can be done in the same way as with normal flash shooting.

• Flash exposure compensation	• FEB
• High-speed sync (FP flash)	• Manual flash
• FE lock	• Stroboscopic flash

[J] With FE lock, if even one Speedlite will result in underexposure, the <~> icon will blink in the viewfinder. Open the aperture more or move the slave unit closer to the subject.

Setting Communication Channel

If there is another Canon wireless flash system nearby, you can change the channel No. to prevent signal confusion. Both the master and slave units must be set to the same channel No.

Press the <ZOOM/~> button so that <~> blinks.

Set the channel No.

Turn the <@> dial to select the channel number, then press the <(!» button.

mJ Zoom 2

37

Image 37

Canon SBOEX instruction manual Using Fully Automatic Wireless Flash, Setting Communication Channel

Contents

Sboex Thank you for purchasing a Canon product Contents Nomenclature Push ~TLI Fully Automatic Flash Shooting Using E-TTL II and E-TTL Autoflash Shooting Modes Install the batteries Installing BatteriesOpen the cover Close the cover Attaching to the Camera Wireless Selector Settings~t Loosen the locking ring Attach it to the camera @E~~Z6OJ~-~~1 Set the power switch to on Turn on the Power SwitchAbout Auto Power Off Check that the flash is ready Zoom SOmm 1 Set the Speedlite to ETTl Fully Automatic Flash Shooting Using E-TTL II and E·TTL Autoflash in the Shooting Modes Using Flash Press the ~ button ~ Flash Exposure Compensation Set the flash exposure bracketing amount ~ FEB Flash Exposure Bracketing ii&WPress the @ button Focus the subject Press the FE L button FE L FE Lock ~ is displayed ~ High-Speed Sync FP Flash Set the Bounce Direction Bounce Flash Point the flash head upward by Pull out the wide panel Creating a CatchlightPush in the wide panel Closeup Flash Shooting Press the ZOOM/~ button Using the Wide Panel Ettl Manual Flash Press the Mode button so thatIs displayed Set the flash output Figures for decreased flash output -+ Displayed Flash Output Figures Multi Stroboscopic Flash Max. Stroboscopic Flashes Press the ~H/~ button so that ~ Second-Curtain Sync~ is displayed Change the setting Fn Setting Custom Functions Custom Setting FUItin Custom Function SettingsPage Page Wireless Flash Basic Wireless Settings & Setup About Wireless Flash Wireless flash with two slave groups p.38 Multi-Speedlite, Wireless Lighting ConfigurationsWireless flash with three slave groups pAO Fully Automatic Wireless Flash Set the camera and shoot Check the flash operation Master UnitsFlash ON/OFF Disable the master unitsflash firingPress the ZOOM/~ button so That the display blinks as shown on Setting Communication Channel Using Fully Automatic Wireless FlashPress the ZOOM/~ button so that ~ blinks Set the channel No Flash Ratio with E-TTL Set the wireless selector toSet the Slave Unit Press the ZOOM/~ button so That ~ blinks MASTER. p.34 Set the slave units Wireless Flash with Three Slave Groups Modeling Flash Set the master unit and shootAbout Slave Group Control Set the flash output Wireless Manual Flash with Varied Flash Output Stroboscopic Flash Manual FlashPage Reference Speedlite 580EX On-camera/Master unit 580EX System Reverting to 580EX Default Settings About Color Temperature Information TransmissionAbout the AF-Assist Beam Troubleshooting Flash range scale bars blink Type Major Specifications ....i..,Si.~ Custom Functions Normal Flash Full Output and Quick Flash GNo Guide No. GNo. ISO 100, in meters/feet Using a Type-B Camera -~Jt~d1lllll1llL Page Page Canon Canon Call0ll Canon !\UIlfJlJi!l~n&~pilJ