Check the flash operation.
~Press the master unit'stest firing button.
~The slave unit will fire. If the flash does not fire, adjust the slave unit'sangle toward the master unit and distance from the master unit.
Set the camera and shoot.
'ilW Set the camera in the same way as with normal flash shooting.
Outdoors | .. | / |
| 10m (32.8ft.) |
8m (26.2ft.) 12m (39.4ft.)
1:) Use the mini stand (tripod socket provided) to prop up the slave unit.
eUse the bounce feature to SWing the slave unit'sflash body so that the wireless sensor faces the master unit.
(t< Indoors, the wireless signal may also bounce off the wall so there is more leeway in positioning the slave unit(s).
;;" After positioning the slave unit(s), be sure to test the wireless operation before shooting.
(it Do not place any obstacles between the master unit and slave unit(s). Obstacles can block the transmission of wireless signals.
35
