ZOOM Setting the Flash Coverage and Using the Wide Panel III
The flash coverage can be set to match the lens focal length from 24mm to 105mm. The flash coverage can be set automatically or manually. Also, with the
ETTL mil Zoom 2l.f mm
0.5 0.7 1 1.5 2 3 4 6 9 13 18 m
Press the <ZOOM/~> button.
11&) Turn the <@> dial to change the flash coverage.
~When the flash coverage is set automatically, <1m> is not displayed.
[]]If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery.
Using the Wide Panel
Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14mm.
The catchlight panel will come out at the same time. Push the catchlight panel back
in.
~The <ZOOM/~> button will not work.
@
$,
@
If you use bounce flash with the wide panel in place, the entire display on the LCD panel will blink as a warning. Since the subject will be illuminated by both the bounce flash and direct flash, it will look unnatural.
Pull out the wide panel gently. Using excessive force may detach the wide panel.
If the wide panel is accidentally detached, the <ZOOM/~> button will not work. The zoom
feature will work again when you press the spot shown by the arrow. The entire display on the LCD panel will blink, but the Speedlite will work normally.
[]] The flash coverage will not be compatible with the EF15mm f/2.8 Fisheye lens.
20
