!lJ is
1!l'
;@>
The Speedlite'szoom setting will be set automatically to 24mm. It is possible to change the master unit'szoom setting. However, note that the master unit transmits wireless signals to the slave unit(s) with the preflash. Therefore, the flash coverage must cover the slave unit'sposition. If you change the master unit'szoom setting, be sure to test the wireless operation before shooting.
If the slave unit enters auto power off, it can be turned on again by pressing the master unit'stest firing button.
A test flash cannot be fired while the camera'soperation timer 04 or 06 is active.
Master Unit'sFlash ON/OFF
You can disable the master unit from firing during actual exposure so that only the slave unit(s) will fire in the final picture.
ETTL 1m Zoom ,2Ymm | i Press the <ZOOM/~> button so | ||
I | that the display blinks as shown on | ||
,1/ |
| ||
~ I" |
| the left. | |
/"1~'11 |
| ||
Disable the master unit'sflash firing.
iiji Turn the <@> dial to select <0 FF>, then press the <@> button.
t»> The < .....2> icon will blink.
ETTL 1m Zoom 2Ymm
!lJ Even if you disable the master unit'sflash firing, it will still fire a preflash to transmit wireless signals.
36
