Changing the Color and Shooting

Select Y.

Follow Step 1 on p. 59 to select Y.

Press the l button.

The unchanged image and the Color Swap image will both display.

The default setting is to change green to gray.

Specify the color to be swapped.

Position the center frame so it is filled with the color you want and press the q button.

XThe specified color will be recorded.

Specify the target color.

Position the center frame so it is filled with the color you want and press the r button.

XThe specified color will be recorded.

Specify the range of colors to be swapped.

Press the op buttons or turn the  dial to adjust the range of colors affected.

Select a negative value to limit the range of colors. Select a positive value to extend the range of colors to similar colors.

Pressing the l button accepts the setting and restores the shooting screen.

101

Page 101
Image 101
Canon SX200IS manual Select Y, Specify the color to be swapped, Specify the target color, 101