Canon SX200IS Changing Playback Functions, Changing the Start-up Image or Sound, Change Sounds

Changing Playback Functions

You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).

Selecting the Image that First Displays in Playback

●Select [Resume], then press the qr buttons to select an option.

Last shot	Resumes with the most recently shot
	image.
Last seen	Resumes with the image last viewed.

Changing the Start-up Image or Sound

In the 3 tab, you can set one of your recorded images as the start-up image when the camera power is turned on, or change the sounds played for each camera operation with your recorded sounds.

Change Sounds

●Select [Sound Options], then press the m button.

●Press the op buttons or turn the  dial to select an option.

●Press the qr buttons to select a setting.

1

2

Preset sounds.

You can register your sounds using the supplied software (ZoomBrowser EX/ImageBrowser) (p. 147).

Changing the Start-up Screen

●Select [Start-up Image], then press the m button.

●Press the qr buttons to select a setting.

No start-up image.

1Preset images.

2You can register your images.

146