Selecting the Communication Method and LAN Type

Selecting the LAN Type

For [LinkedShot] instructions, refer to page 61. Note that no information about [LinkedShot] is given in this chapter.

Turn the <5> dial to select the type of LAN, and then press <0>.

Select [OK] and press <0> to go to the next screen.

Wireless LANThe [Wireless LAN setup method] screen is displayed.[Connect with wizard]: See p.21[WPS (PBC mode)]: See p.23[WPS (PIN mode)]: See p.24

Select [W S ( BC mode)] or [WPS (PIN mode)] when using a wireless LAN terminal compatible with Wi-Fi rotected Setup (WPS).

Wired LAN

The [Network] settings screen is displayed. If you have selected a wired network, refer to page 25, “Configuring Network Settings.”

Use a Category 5 or higher STP LAN cable. (STP: Shielded Twisted Pair)

20