Using the Wizard to Establish a Connection

Selecting the Wireless Network

When you select [Connect with wizard], active wireless LAN terminals in your area are listed, accompanied by information about them. Select the SSID (or ESS-ID) of your desired wireless LAN terminal.

1

Select [Connect with wizard].

Turn the <5> dial to select [Connect with

wizard], and then press <0>.

1 2 3 4

2

Select the wireless LAN terminal.

 

 

 

 

 

To select the wireless LAN terminal, press <0>.

Turn the <5> dial to select the wireless LAN terminal, and then press <0>.

Select [OK] and press <0> to go to the next screen.

1Indicates whether the device is in infrastructure or ad hoc mode

2An icon is displayed if the wireless LAN terminal is encrypting communication

3 Indicates the first 9 characters of the SSID

4 Indicates the channel used

Encryption by Wireless LAN Terminals

If the wireless LAN terminal is encrypting communication, select the corresponding method in [Authentication] and [Encryption].

[Authentication]: Open system, Shared key, WPA-PSK, or WPA2-PSK

[Encryption]: WEP, TKIP, or AES

[Enter connection] and [Search again]

To configure settings for the wireless LAN terminal manually, select [Enter connection] and press <0>. Complete the settings for the items displayed, one after another.

To search for wireless LAN terminals again, select [Search again] and press <0>.

21