WPS Connections (PIN Mode)

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set on the wireless LAN terminal to establish a connection.

Even if there are multiple wireless LAN terminals active in your area, this is a relatively reliable method of establishing a connection using a shared identification number.

It may take about one minute to establish connection.

Connection may not be possible if stealth functions are enabled on the wireless LAN terminal. Deactivate stealth functions.

1

Select [WPS (PIN mode)].

Turn the <5> dial to select [WPS (PIN mode)],

 

and then press <0>.

 

Select [OK] and press <0> to go to the next

 

screen.

2 Specify the PIN code on the wireless LAN terminal.

On the wireless LAN terminal, specify the 8-digit IN code shown on camera LCD monitor.

For instructions on setting PIN codes on the wireless LAN terminal, refer to the instruction manual of the wireless LAN terminal.

Select [OK] and press <0> to display the confirmation screen.

3 Establish a connection with the wireless LAN terminal.

Select [OK] and press <0> to establish a connection with the wireless LAN terminal. When the connection with the wireless LAN terminal is established, the [Network] screen (p.25) is displayed.

24