Configuring EOS Utility Communication Settings

Double-click the pairing software icon.

3 X Detected cameras are listed. Cameras that have already been connected are not included in the list.

Click [Connect].

If multiple cameras are displayed, identify the camera to connect to by its [MAC address] or [IP address].

You can check the [MAC address] and [IP address] by accessing [Confirm settings] in the menu (p.66).

When the camera detects the computer on which

4 you clicked [Connect] in step 3, the message at left is displayed.

Turn the <5> dial to select [OK], and then press <0>.

Press <0>. Turn the <5> dial to select the set

5 number, and then press <0>.

After you turn the <5> dial to select [OK] and press <0>, the connection wizard is closed and EOS Utility starts up.

XThe <LAN> lamp on the transmitter is lit in green. Settings information is stored on the camera. It is not stored on the transmitter.

The EOS Utility network settings are now complete.

45