Canon WFT-E2 II 6 Establish a wireless connection between the G S device and Bluetooth unit, USB, GPS, Not conn, Disconnect, 5 Select [OK], 7 Select the GPS device

Connecting GPS Devices via Bluetooth

5 Select [OK].

After the Bluetooth unit is attached to the transmitter, the transmitter’s <USB> lamp blinks in green and a message is displayed indicating that a connection has been established.

When the confirmation message is displayed, select [OK].

XAt this point, the menu option [Disconnect] becomes available. Select this option before detaching the GPS device.

6 Establish a wireless connection between the G S device and Bluetooth unit.

Turn on the G S device and activate Bluetooth® on it.

Select [Bluetooth device connection].

XNearby Bluetooth® devices in use are listed. (Only GPS devices can be connected.)

7 Select the GPS device.

Press <0> to display the connection status of Bluetooth® devices.

Pressing <0> when the status is [Not conn.] will list nearby Bluetooth® devices in use.

Turn the <5> dial to select [GPS] , and then press <0>.

Select [OK] and press <0>.

If a Bluetooth® password has been set on the GPS device, a password input screen is displayed. Enter the password.

XThe transmitter now starts to establish a connection with the GPS device.

It may take a few minutes to establish a connection with the GPS device.

Camera operations such as shooting, menu display, or image playback are not possible until the connection is established.

88