WPS Connections (PBC Mode)

This is a connection mode when using a wireless LAN terminal compatible with Wi-Fi Protected Setup (WPS). Pushbutton Connection mode (PBC mode) makes it easy to establish a connection between the camera and the wireless LAN terminal by pressing the WPS button on the wireless LAN terminal.

Note that if multiple wireless LAN terminals are active in your area, it may be harder to establish a connection. In this case, try using [WPS (PIN mode)] to establish a connection.

Confirm the position of the WPS button on the wireless LAN terminal in advance. It may take about one minute to establish connection.

Connection may not be possible if stealth functions are enabled on the wireless LAN terminal. Deactivate stealth functions.

1

Select [WPS (PBC mode)].

Turn the <5> dial to select [WPS (PBC mode)],

 

and then press <0>.

 

Select [OK] and press <0> to go to the next

 

screen.

2 Establish a connection with the wireless LAN terminal.

ress the W S button on the wireless LAN terminal. For details about where the button is located and how long to press it, refer to the instruction manual of the wireless LAN terminal. Select [OK] and press <0> to establish a connection with the wireless LAN terminal. When the connection with the wireless LAN terminal is established, the [Network] screen (p.25) is displayed.

23