Configuring FTP Communication Settings

These instructions are continued from Chapter 1.

1

Turn the <5> dial to select [Address setting],

and then press <0>.

If you have set the DNS server setting to

2 [Disable], the screen at left is displayed.

Press <0> to select the input position, and then turn the <5> dial to enter the IP address of the FTP server.

If you have set the DNS server IP address setting to [Auto assign] or [Manual setting], the screen at left is displayed.

For instructions on screen operations, refer to “Virtual Keyboard Operation” (p.27).

Enter the FTP server’s server name or IP address.

In [Port number setting], enter 00021, in most

3 cases.

Turn the <5> dial to select [OK], and then press <0> to go to the next screen.

Complete the [Passive mode] settings.

4 If an Error 41 (“Cannot connect to FTP server”) is displayed in step 8, setting [Passive mode] to [Enable] may resolve it.

Complete the [Proxy server] settings.

5 Turn the <5> dial to select [OK], and then press <0> to go to the next screen.

30