Canon WFT-E2 II Setting Up Linked Shooting, Slave, WFT settings, WFT settings, Select [LinkedShot], Set up the slave cameras, Select [Connection wizard]

Setting Up Linked Shooting

First, establish a connection from the slave cameras to the master camera. Because linked shooting utilizes a wireless connection via IEEE 802.11g in ad hoc mode, it is not available over wired LANs.

1	Display the transmitter menu.
	On the camera, press the <7> button.

On the [7] tab, select [WFT settings] and press <0>. [WFT settings] is added to the tab after you attach the transmitter.

2

3

4

Select [Connection wizard].Select [LinkedShot].Set up the slave cameras.

Select [Slave].

XThe slave cameras are now ready, with the following screen displayed.

When using multiple slave cameras, set up all slave cameras to slave state.

Once the settings are complete, slaves cannot be added or removed. You must repeat the setup process from step 1.

62