Using the Wizard to Establish a Connection

Entering the Wireless LAN Encryption Key

Next, enter the encryption key of the wireless LAN terminal. For details on the encryption key, refer to the device’s instruction manual.

Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and encryption of the wireless LAN terminal.

1

The [Key index] screen is displayed only if WEP

encryption is used by the wireless LAN terminal.

Turn the <5> dial to select the key index number

 

specified as the access point, and then press

 

<0>.

 

Select [OK] and press <0> to go to the next

 

screen.

2

Turn the <5> dial to select the key format, and

then press <0>.

Select [OK] and press <0> to go to the next screen.

Enter the encryption key.

3 To switch between input areas, press the <H> button.

To move the cursor, turn the <5> dial.

In the bottom input area, turn the <5> dial and press <0> to enter the encryption key.

If you make a mistake, press the <L> button to erase it.

When you press the <7> button to complete the connection with the wireless LAN terminal, the [Network] screen (p.25) is displayed.

To return to the previous screen, press the <6> button. The entry is erased.

22