Wi-Fi Protected Setup (WPS) - PIN Code

In this setup mode, the camcorder will issue an 8-digit PIN code that you then need to enter in the wireless router setup screen. Even if there are multiple access points active in your area, this is a relatively reliable method of establishing a connection using a shared PIN code.

It may take about one minute to establish connection.

1Open the [Set Up New] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Set Up

New]

2Select [WPS: PIN Code] and then press SET.

The camcorder will generate and display an 8-digit

PIN number.

3Enter the PIN code into the wireless router’s WPS setup screen.

For details about how to access your wireless router’s settings and activate the Wi-Fi Protected Setup (W S) using a PIN code, refer to the instruction manual of your wireless router.

4Within 2 minutes, press SET on the camcorder.

While [Connecting] appears on the screen, you can press SET or the CANCEL button to cancel the operation.

After the connection is correctly established, continue with the procedure to configure the IP address assignment (A 15).

10