Camcorder Settings

Auser name and password are required before the Wi-Fi Remote application (Wi-Fi-enabled device connected to the Wi-Fi network) can access the transmitter in order to operate the camcorder. Additionally, you can set a unique camcorder identification code and designate the port that Wi-Fi Remote should use. The Wi-Fi connection will be disabled while you change these settings.

[User Name]*, [Password]*

Protect the remote operation of the camcorder with a user name

 

and password.

[Port No.]

The port number (HTTP protocol) used by Wi-Fi Remote. This is

 

usually set to port 80, but you can change it if necessary.

[Camera ID]

Set a unique camcorder identification code that will appear on the

 

Wi-Fi Remote screen. This is convenient if you are using a multi-

 

camera shooting setup.

* Required settings.

 

1Open the [Camera Settings] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Camera

Settings]

2Select the desired setting and then press SET.

3Enter the desired value as described below.

If necessary, repeat steps 2 and 3 to set additional settings. When you finish changing the settings, select [L], press SET and then close the menu. When you close the menu after changing the camcorder’s settings, the camcorder will reconnect to the Wi-Fi network using the new settings.

[User Name], [Password], [Camera ID]

1Use the joystick or turn the SELECT dial to select a character and then press SET to add it.

Repeat this step as necessary to enter the necessary text.

2After entering the desired text, select [OK] and then press SET.

[Port No.]

1Push the joystick up/down or turn the SELECT dial to select a value for the first field and then press SET to move to the next field.

2After completing all the fields, select [Set] and press SET to enter the port number.

17