The TCP/IP settings screen appears.
The wireless connection mode selection screen appears. Continue the procedure as described in Entering the Wi-Fi Network’s Details Manually (A13, from step 2).

Changing Settings

You can edit the Wi-Fi network settings even after the initial setup. Changing settings manually requires more advanced knowledge of Wi-Fi and network settings. The Wi-Fi connection will be disabled while you change these settings. After completing the changes, the camcorder will connect to the Wi-Fi network using the new configuration.

1Select the network configuration profile you want to change (A 20).

2Open the Wi-Fi [Edit] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Edit]

3Continue with one of the following procedures depending on the settings you wish to change.

Changing Wi-Fi Settings

4Select [LAN Setup] and then press SET.

Changing TCP/IP Settings

4Select [TCP/IP] and then press SET.

5Select [IP Address Assignment] and then press SET.

6Select [Automatic] or [Manual] and then press SET.

If you selected [Automatic], IP settings will be assigned automatically and no further settings are necessary.

Select [L], press SET and then close the menu.

29