Error Messages

Wi-Fi connection terminated

An error occurred on the access point or the computer or other Wi-Fi-enabled device.

XCheck the Wi-Fi-enabled device and access point and try connecting again.

The Wi-Fi signal became too weak and the wireless connection was lost.

XWait a moment or turn off other devices in the area that may be interfering with the Wi-Fi signal and then try connecting again.

Wi-Fi error. Incorrect encryption key.

When the encryption method was set to [WEP], the WEP index key (encryption key) or its length (number of characters) is incorrect.

XWhen entering ASCII characters, enter 5 characters (64-bit encoding) or 13 characters (128-bit encoding). When entering hexadecimal characters, enter 10 characters (64-bit encoding) or 26 characters (128-bit encoding).

Wireless communication cannot be used

The WFT-E6 Wireless File Transmitter has malfunctioned.

XConsult a Canon Service Center (listed on the back cover of the camcorder’s instruction manual).

Wireless communication cannot be used while the wireless microphone is attached

The transmitter cannot be used while an optional WM-V1 Wireless Microphone is attached to the camcorder.

XDisconnect the WM-V1 from the camcorder and turn it off.

Wireless communication cannot be used WFT error

The channel specified in the [LAN Setup] settings of the network configuration selected cannot be used in accordance with the restrictions on countries/regions of use of the attached WFT-E6 Wireless File Transmitter model.

XChange the [LAN Setup] settings (A29). For details see Areas of Use and Restrictions (supplied with the transmitter).

Wireless communication is not working correctly

There’s a hardware problem with the camcorder’s Wi-Fi-related circuitry.

XTry turning the camcorder off and the on again. If the problem persists, consult a Canon Service Center.

35