Wi-Fi Protected Setup (WPS) - Button

Wi-Fi Protected Setup (WPS) is the easiest way to set up the Wi-Fi network. However, it may not work correctly if there are several active access points in the area. In such case try using the [WPS: Pin Code] (A 10) or [Connection Wizard] (A 11) option.

1Open the [Set Up New] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Set Up

New]

2Select [WPS: Button] and then press SET.

3Press the WPS button on the wireless router.

For details about how to activate the Wi-Fi protected setup, refer to the instruction manual of your wireless router.

4Within 2 minutes, press SET on the camcorder.

While [Connecting] appears on the screen, you can press SET or the CANCEL button to cancel the operation.

After the connection is correctly established, continue with the procedure to configure the IP address assignment (A 15).

9