Three Ways to Connect to a Wi-Fi Network 
Before using the Wi-Fi Remote application to remotely control the camcorder, you need to wirelessly connect the camcorder (with the transmitter attached) to a Wi-Fi network via an access point (wireless router). There are three ways to do so, and the method you use will depend on the specifications of the access point you want to use.
Note that using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Be aware of the risks involved.
[WPS: Button]
If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be easy and require minimal configuring and no passwords. To check if your wireless router has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to the instruction manual of your wireless router.
[WPS: PIN Code]
Even if your wireless router does not have a dedicated WPS button, it may support WPS using a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless router’s WPS function. For details refer to the instruction manual of your wireless router.
[Connection Wizard]
If your wireless router does not support Wi-Fi Protected Setup (WPS) or you wish to manually configure settings, you can use the onnection Wizard to manually set the various settings. This requires more advanced knowledge of Wi-Fi and network settings.
Depending on the country/region of use, some restrictions on outdoor use or Ad Hoc mode use may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details see Areas of Use and Restrictions (separate leaflet supplied with the transmitter).