Saving the Configuration 
1Review the access point’s configuration and then press SET.
The first screen shows the access point’s SSID and the type of connection. Push the joystick up/ down or turn the SELECT dial to review additional settings before pressing SET.
2 | Save the current configuration. |
|
Select the desired configuration number | and then |
press SET. You can save up to 5 different network configuration profiles on the camcorder. If you select a configuration number that was already in use, the previous configuration will be overwritten by the new.
Select [OK] and then press SET. When the confirmation screen appears, press SET.
The camcorder will connect to the network using
the configuration just saved. The 
icon will appear on the upper left of the screen, first in yellow while connecting and then in white when the connection is established. In the rear panel,
the bars of the 
icon indicate the strength of the
16