NOTE: Do not bundle power and communication wiring with sensor and device wiring.
Fig. 9 — Connection to CCN Bus
Change the Default Password — To change the default password, perform the following procedure:
NOTE: The password must have already been entered to per- form this procedure.
1.Press 3 and then SET . The LID display will show: Controller Password
2.Press ENTER . The LID display will show: Log in to Controller
Enter Password
3.Press EXPN/EDIT . The LID display will show: Password
1111
4.Enter the new password (up to 8 digits) and press ENTER . The LID display will show:
Password
(New Password)
5.Press CLEAR to leave the password screen and return to the default display screen.
Set the Clock — The user must be logged in to set the clock. To set the clock, perform the following procedure:
1.Press 1 and then SET . The LID display will show: Set Clock
2.Press ENTER . The LID display will show: No Maintenance
NOTE: There is no maintenance information regarding setting the clock.
3.Press EXPN/EDIT . The LID display will show: Time
00:00
4.Enter the time. The time is entered in military time (for
example 14.59 for 2.59 pm). Press the button. The LID display will show:
Day of Week 1
5.Enter the day of week. The numbers 1 through 7 corre- spond to the days of the week (1 = MON, 2 = TUE,
3 = WED, 4 = THUR, 5 = FRI, 6 = SAT, 7 = SUN). Press
. The LID display will show: Month
1
6.Enter the number of the corresponding month (1 through
12). Press . The LID display will show: Day
1
7.Enter the day of the month. Press . The LID display will show:
Year 95
8.Enter the last two digits of the current year. Press . The LID display will show:
Update Clock No
9.Press 1 and then ENTER to change display to a YES. Press ENTER . The clock will be updated. Press CLEAR twice to view the default display and the clock should update to the input time and date.
15