Carrier’s diagnostic standard tier display tools such as Navigator™ or Scrolling Marquee can be used with the PremierLink™ controller. Access is available via an RJ-11 connection or a 3-wire connection to the communication bus. Computers equipped with Carrier user interface software such as Service Tool, ComfortVIEW™, or ComfortWORKS® software are used to interface with the system. When used as part of the CCN, other devices such as the CCN data transfer, Linkage Thermostat, or system control panel comfort controller can read data from or write data to the PremierLink Controller.
SUPPLY AIR TEMPERATURE SENSOR — A factory- installed supply air temperature sensor is provided with the PremierLink controller. Wiring of the temperature sensor is shown in Fig. 7. The sensor is a 10 kohm thermistor, which is protected by a stainless steel housing probe. Probe is
LEAVING WATER TEMPERATURE SENSOR — A factory- installed leaving water temperature sensor is provided with PremierLink controller. Wiring of the temperature sensor is shown in Fig. 7. The sensor is a 10 kohm thermistor is protect- ed by a stainless steel housing probe. Probe is
AQUAZONE THERMOSTAT — A
PREMIER
LINK
PWR
HS1/EXH/RVS
CR
LEGEND |
|
| |
CR — Control Relay |
|
| |
LWT — Leaving Water Temperature Sensor |
| ||
SAT — Supply Air Temperature Sensor |
| ||
SPT — Space Temperature Sensor | CMP1 | ||
NOTE: Reversing valve is on in Cooling | |||
| |||
mode. |
|
| |
|
| FAN | |
|
| J8 | |
| PWR | J1 | |
J6 | J5 | J4 |
S | S | L | CMPSAFE |
| |||
P | A | W |
|
T | T | T |
|
COMPLETE
C
CONTROL
Y
W
CR
O
G
R
C
AL1
AL2
A
Fig. 7 — PremierLink Controller Applications with Complete C Control
8