Carrier Access AB II manual 560DQDJHPHQW&DEOH, Connecting the PC Directly to the Access Bank

1.4 Connecting the PC Directly to the Access Bank II

The RS-232 Management cable (provided) is equipped with a male 26-pin D-type subminiature connector on the end that mates with the secondary RS-232 connector pins of the Management port, and a female 25-pin connector on the DCE end for connection to the RS-232 communications interface of the PC.

D-SUB-26 (male)		DCE-DB-25
SECONDARY	BRAID	(female)

	1 SHIELD		1 SHIELD
	7 GND	GND	7 GND
		TXD
	14 STXD		2 TX
		RXD
	16 SRXD		3 RX
		RTS
	19 SRTS		4 RTS
		CTS
	13 SCTS		5CTS
		DTR
	10 SDTR		20DTR
		CD
	12 SCD		8CD
RS-232 Management Port
on Access Bank II

Local PC with Remote

Monitor Software

56￿￿￿￿￿0DQDJHPHQW￿&DEOH

&RPP￿3RUW￿RQ

0DQDJHPHQW￿3&

56￿￿￿￿￿0DQDJHPHQW 3RUW￿RQ￿$FFHVV￿%DQN￿,,

To connect a local PC to the Access Bank II using the RS-232 Management Cable:

1.Set the System Configuration Local/Remote DIP switch 1 on the Access Bank II Control Panel to the Remote mode.

1-4