Carrier Access AB II manual WR%0, Connecting a Modem to the Access Bank II for Remote Access

Connecting a Modem to the Access Bank II for Remote Access

1.5Connecting a Modem to the Access Bank II for Remote Access

The RS-232 Management cable (provided) is equipped with a male 26-pin D-type sub-miniature connector on the end that mates with the secondary RS-232 connector pins of the Management port, and the female 25-pin connector on the DCE end. To connect the Access Bank II to a modem, use the DCE end with a Carrier Access Corporation null modem converter.

					10 ft.
			D-SUB-26 (male)			DCE-DB-25
						(female)
			SECONDARY		BRAID
			1 SHIELD			1 SHIELD	&RPP￿3RUW￿RQ
			7 GND		GND	7 GND
							56￿￿￿￿￿&DEOH0DQDJHPHQW￿3&
					TXD
			0RGHP
			14 STXD		RXD	2 TX	Local PC with Remote
			16 SRXD		RTS	3 RX	Monitor Software
			19 SRTS		CTS	4 RTS
			13 SCTS		DTR	5CTS
			10 SDTR		CD	20DTR
3RUW￿RQ￿$FFHVV￿%DQN￿,,	'%￿￿	WR'%￿￿0		3671		8CD	0RGHP
			12 SCD
			RS-232 Management
			Data Port on Access Bank II
	1XOO￿0RGHP
	10 ft.
D-SUB-26 (male)			DCE-DB-25
SECONDARY	BRAID		(female)
1 SHIELD			1 SHIELD
7 GND	GND		7 GND
	TXD
14 STXD			2 TX
	RXD
16 SRXD			3 RX		Local PC with Remote
	RTS				Monitor Software
19 SRTS			4 RTS
	CTS
13 SCTS			5CTS
	DTR
10 SDTR			20DTR
	CD
12 SCD			8CD

RS-232 Management

Data Port on Access Bank II

1-5