Connections
Connecting Headphones
IMPORTANT!
•Before connecting headphones, be sure to use the Digital Piano’s VOLUME controller to turn the volume down to a low level. After connecting, you can adjust the volume to the level you want.
•The Digital Piano automatically adjusts sound output to optimize for headphones (when headphones are connected) or the
Bottom
PHONES jacks
Stereo standard plug
Connect commercially available headphones to the PHONES jacks. Connecting headphones to either of the PHONES jack cuts off output to the speakers, which means you can practice even late at night without bothering others. To protect your hearing, make sure that you do not set the volume level too high when using headphones.
NOTE
•Be sure to push the headphones plug into the PHONES jacks as far as it will go. If you don’t, you may hear sound from only one side of the headphones.
•If the plug of the headphones you are using does not match the PHONES jacks, use the applicable commercially available adaptor plug.
•If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the speakers when you play.
Connecting Audio Equipment or an Amplifier
You can connect audio equipment or a music amplifier to the Digital Piano and then play through external speakers for more powerful volume and better sound quality.
IMPORTANT!
•The Digital Piano automatically adjusts sound output to optimize for headphone output (when headphones are connected) or
•Whenever connecting a device to the Digital Piano, first use the VOLUME controller to set the volume to a low level. After connecting, you can adjust the volume to the level you want.
•Whenever you connect any device to the Digital Piano, be sure to read the user documentation that comes with the device.
Pin plug |
|
| RIGHT (Red) |
| LEFT (White) |
Standard jack | Audio amplifier AUX IN jack, etc. |
| Portable audio player, etc. |
| Guitar amplifier |
| Keyboard amplifier, etc. |
| Standard plug |
| INPUT 1 |
| INPUT 2 |
Playing Output from External Equipment through the Piano’s Speakers
Use commercially available cables to connect the external audio equipment to the piano’s LINE IN jacks as shown in Figure .
LINE IN R jack input sounds through the piano’s right speaker, while LINE IN L/MONO jack input sounds through the left speaker. Connecting to the LINE IN L/MONO jack only causes the same output to be produced from both speakers. It is up to you to purchase connecting cables that are compatible with the equipment you are connecting.
| B | |
|
|