■Performing Punch-in Recording for Areas Smaller than One Measure

Use the procedure below to specify a punch-in recording area that includes a part of a measure.

Example: To re-record from beat 3 of measure 2 up to beat 1 of measure 4

To re-record this section

1. Start playback of the song that contains the section you want to re-record.

2. When playback reaches the beginning of the section you want to re-record, press the (REPEAT) button.

3. When playback reaches the end of the section you want to re-record, press the (REPEAT) button again.

4. Press the (START/STOP) button to stop playback.

5. Turn on the recorder and select the track that contains the section you want to re-record.

•For information about selecting a track, see step 3 under “Recording to a Specific Track (Part)” (page E-35).

6.Hold down the (RECORDER) button until the punch-in recording screen appears on the display.

7.Press the  (q) button to turn on auto punch-in recording.

8.Press the (REPEAT) button to turn on repeat.

9.Press the (START/STOP) button.

This starts punch-in playback from the measure before the location (start point) you specified in step 2, above.

•Punch-in recording starts automatically when playback reaches the start point and ends automatically when it reaches the location you specified in step 3 (end point).

Recording Your Keyboard Play

English

E-39