Music Presets 
3. Press the (START/STOP) button to start Auto Accompaniment with the chord progression of the Music Preset. Play the melody on the keyboard.
•The preset chord progression repeats until you stop it by pressing the (START/STOP) button again.
•Pressing the (ACCOMP ON/OFF) button so the ACCOMP ON/OFF lamp is lit (not flashing) or unlit will turn off the chord progression of the Music Preset and play the normal Auto Accompaniment pattern.
•Each press of the (ACCOMP ON/OFF) button cycles in the sequence shown below.
Unlit | Lit | Flashing |
Creating an Original User Preset
A Music Preset editor is provided to allow you to create your own original Music Presets (user presets). Up to 50 user presets can be stored in Music Preset Group D.
1. Select the Music Preset you want to edit in order to create your user preset.
2. Change the tone number, rhythm number, and other settings of the Music Preset as you want.
English
Normal Auto Accompaniment
Music Preset
• The settings you configure here will be saved as a |
user Music Preset. See step 2 under “Selecting a |
Music Preset” (page |
configure and save for a user Music Preset. |
chord progression
•You can use the following steps to change the rhythm after selecting a Music Preset.
(1)Hold down the (RHYTHM) button until the displayed Music Preset number and name change to the rhythm number and name.
(2)Use the (w, q) buttons to select the rhythm you want.
(3)Hold down the (RHYTHM) button again until the rhythm number and name change back to the Music Preset number and name.
•To change the tone, use the through (tone
group) buttons to select the tone group and then use the (w, q) buttons to select a tone number.
4.To exit a Music Preset, press and (MUSIC PRESET) at the same time.
3. Press the (BALLAD/PIANO RHYTHMS) |
and (USER RHYTHMS) buttons at the |
same time. |
This displays a screen for selecting the type of editing operation you want to perform.
Editing operation type