Using a Memory Card

Formatting a Memory Card

IMPORTANT!

•Format a memory card before using it for the first time.

•Before formatting a memory card, make sure it does not have any valuable data stored on it.

•The memory card format operation performed by this Digital Piano is a “quick format”. If you want to completely delete all of the data on the memory card, format it on your computer or some other device.

1. Insert the memory card you want to format into the Digital Piano’s memory card slot.

Make sure the write-protect switch of the memory card is not in the write-protect position so writing is enabled.

2. While holding down the  (FUNCTION) button, press the  (CARD/INTERNAL) button.

This displays the format screen.

3. Press the  (ENTER) button.

This will display a confirmation message (SURE?).

•If you want to cancel the format operation, press the  (NO) or  (EXIT) button.

4.Press the  (YES) button.

•The message “Please Wait” will remain on the display while the format operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after formatting is complete.

Saving Digital Piano Data to a Memory Card

Use the following procedure to save Digital Piano data to a memory card.

•Recorder songs can be saved as a standard MIDI file (SMF format 0).

•User songs (downloaded songs, etc.) cannot be saved to a memory card.

1. Insert a memory card into the Digital Piano’s memory card slot.

2. Select the data you want to save to the memory card.

To select this

Do this:

type of data:*1

User rhythms

Select from among user rhythms 001

 

through 010 (page E-20).

 

 

User Music

Select from among user Music Preset

Preset

001 through 050 (page E-27).

 

 

Recorder songs

Select from among recorder songs 1

 

through 5 (page E-34).

 

 

Registrations*2

Press the  (REGISTRATION) button

 

so its lower lamp is lit.

 

 

*1 For more information about data types, see page E-43.

*2 All registration data (8 banks × 12 areas) is saved in a single file.

3. Hold down the  (CARD/INTERNAL) button until the “LOAD” screen appears for the data you selected.

•You can cancel the LOAD/SAVE operation any time by pressing the  (EXIT) button.

4.Press the  (i) button to switch to the “SAVE” screen for the data you selected.

•If you are saving a recorder song to a standard MIDI file (SMF), press the  (i) button again so “SMF” is displayed on the right side of the screen.

English

E-45