Using Built-in Tones

Using Octave Shift

After you split the keyboard (page E-10), you may find out that the lower range notes on the left are too low or that the upper range notes on the right are too high.

You can use octave shift to shift the octaves of the upper range and lower range upwards or downwards in octave units.

1. While holding down the  (FUNCTION) button, press the  (TONE) button.

This displays the octave shift screen.

Currently selected range

Shift amount

2. Use the (PART) button to select the range whose octave you want to change.

•Each press of (PART) cycles through the ranges below.

U1 (Upper1): Main tone

U2 (Upper2): Layered tone

L1 (Lower1): Left (lower range) tone

3. Use the  (w, q) buttons to shift the octave of the currently selected range.

•You can shift the octave within the range of –2 to 0 to 2.

4.Press the  (FUNCTION) button.

This exits the octave shift screen.

NOTE

•Octave shift also can be performed as described for “Octave Shift” (page E-41).

Adjusting the Brilliance of a Tone

1. Press the  (FUNCTION) button.

The FUNCTION lamp will light and the function screen will appear on the display.

Lit

2. Use the  (i) and  (u) buttons to select the Tmpr/Effect screen.

3. Press the  (ENTER) button.

This will display a screen for selecting settings in the Tmpr/Effect group.

4. Use the  (i) or  (u) button to select the brilliance screen shown below.

5. Use the  (w, q) buttons to adjust the brilliance of the currently selected tone. You can adjust brilliance in the range of –3 to 0 to 3.

w: Mellower and softer

q: Brighter and harder

6.Press the  (FUNCTION) button.

This will exit the brilliance screen and cause the FUNCTION lamp to go out.

NOTE

•See “Other Settings” (page E-40) for details about using the  (FUNCTION) button.

English

E-11