Using a Memory Card

5. Use the  (w, q) buttons to select the file number (01 to 99) you want to assign to the data when it is saved to the memory card.

•The file number is the final two characters of the file name* that appears on the display. By changing this within the range of 01 to 99 for each save, up to 99 files of the same data type can be stored on the memory card.

*The first six characters of the file name indicate the data type as shown below. These characters are fixed and cannot be changed.

Data Type

File Name

(** = file number)

 

User rhythms

USRRHY**

 

 

User Music Preset

USRMPS**

 

 

Recorder songs

RECSNG**

 

 

Registrations

REGIST**

 

 

6. Press the  (ENTER) button.

•The message “Please Wait” will remain on the display while the save operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after data save is complete.

•If there already is a file with the same name on the memory card, a message (Replace?) will appear

asking if you want to replace it with the new data. Press the  (YES) button to replace or the  (NO) button to cancel the save operation.

■Memory Card Data Storage

The above procedure stores Digital Piano data in a folder named MUSICDAT on the memory card.

•The MUSICDAT folder is created automatically when you format the memory card on the Digital Piano (page E-45).

•Note that files not in the MUSICDAT folder cannot be loaded, deleted, or renamed by this Digital Piano. You also will not be able to load or delete any file stored in any subfolder inside the MUSICDAT folder.

Loading Data from a Memory Card

You can use the procedure below to load data from a memory card into Digital Piano memory.

IMPORTANT!

•Make sure that all of the data you want to load is in the MUSICDAT folder on the memory card.

Note that if you put data into a music data play-only folder on a memory card (such as the MUSIC__B folder), you will no longer be able to load that file into Digital Piano memory.

1. Insert the memory card into the Digital Piano’s memory card slot.

2. Select the data you want to load.

To load this

Do this:

type of data*

 

User rhythms

Select from among user rhythms 001

 

through 010 (page E-20).

 

 

User songs

Select from among user songs 001

 

through 010 (page E-24).

 

 

User Music

Select from among user Music Presets

Preset

001 through 050 (page E-27).

 

 

Recorder songs

Select from among recorder songs 1

 

through 5 (page E-34).

 

 

Registrations

Press the  (REGISTRATION) button

 

so its lower lamp is lit.

 

 

*For more information about data types, see page E-43.

3. Hold down the  (CARD/INTERNAL) button until the “LOAD” screen appears for the data you selected.

•You can cancel the LOAD/SAVE operation any time by pressing the  (EXIT) button.

4.Use the  (w, q) buttons to select the file you want.

5.Press the  (ENTER) button.

•The message “Please Wait” will remain on the display while the load operation is being performed. Do not perform any Digital Piano operation while this message is on the display. “Complete” appears on the display after data loading is complete.

•If there is already data in the destination you are

loading to, a message (Replace?) will appear asking if

you want to replace it with the new data. Press the  (YES) button to replace or the  (NO) button to cancel the load operation.

E-46

 

B