Casio CTK900 Drawbar Position, Click, Percussion, Parameter Details, E-21, Display Contents in the Drawbar Organ Mode

Using the Drawbar Organ Mode

Parameter Details

Parameter Name

Parameter Display

Settings

Indication

The following provides details about the parameters you can

2nd Percussion

Second

oFF: Off

on:

On

configure using the drawbar organ tone editing screen.

3rd Percussion

Third

oFF: Off

on:

On

Percussion Decay Time

Decay

000 to 127

Drawbar Position

This parameter defines the position of each drawbar, and the

Display Contents in the Drawbar Organ Mode

volume of each overtone. The larger the value, the greater the

In the Drawbar Organ Mode, the current status of the

corresponding overtone’s volume.

drawbar positions, key click, and percussion parameters are

indicated on the display’s bar graph as shown in the

Parameter Name

Parameter Display

Settings

illustrations below. There is one line for each parameter, and

Indication

the bottom segment of the selected parameter line flashes.

Drawbar 16’

Ft16’

0 to 3

The bottom segment of the bar graph column that represents

Drawbar 5 1/3’

Ft 5 1/3’

0 to 3

the currently selected parameter flashes to indicate that it is

selected.

Drawbar 8’

Ft 8’

0 to 3

None of the channel numbers (1 to 16) are displayed in the

Drawbar 4’

Ft 4’

0 to 3

drawbar organ tone selection mode and editing mode.

Drawbar 2 2/3’

Ft 2 2/3’

0 to 3

Drawbar Position Graph

Drawbar 2’

Ft 2’

0 to 3

Drawbar 1 3/5’

Ft 1 3/5’

0 to 3

Setting Value

0

1

2

3

Drawbar 1 1/3’

Ft 1 1/3’

0 to 3

Display

Drawbar 1’

Ft 1’

0 to 3

(Ft: Feet)

Off

On

Click

Flash

The parameter determines whether or not a key click is added

when a sustained tone configured using the drawbars is

Click and Percussion On/Off Graph

played.

Setting Value

Off

On

Parameter Name

Parameter Display

Settings

Indication

Display

Click

Click

oFF: Click Off

on:

Click On

Percussion Decay Time Graph

Setting Value

0-31

32-63

64-95

96-127

Percussion

Display

This parameter lets you add percussion sound, which

provides modulation to sustained tones that you create.

When you hold down a key on the keyboard, the sound

produced decays until it is no longer audible. Pressing the key

again sounds the note again at a louder volume. Percussion

has “2nd Percussion” (2nd overtone pitch) and “3rd

Percussion” (3rd overtone pitch) settings, each of which can

be turned on or off.

You can also specify the percussion decay time, which

controls how long it takes for the percussion sound to decay.

707A-E-023A E-21