
DSP Algorithm List
2:Feedback (Range:
3:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
17:Sin•Function
This is stereo chorus in accordance with a sine wave LFO.
•Parameters
0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.
1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.
2:Feedback (Range:
3:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
18•Function
This is
•Parameters
0:Rate1 (Fast LFO Rate) (Range: 0 to 127) Adjusts the rate of LFO1.
1:Depth1 (Fast LFO Depth) (Range: 0 to 127) Adjusts the depth of LFO1.
2:Rate2 (Slow LFO Rate) (Range: 0 to 127) Adjusts the rate of LFO2.
3:Depth2 (Slow LFO Depth) (Range: 0 to 127) Adjusts the depth of LFO2.
4:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
19:Tri•Function
This is stereo chorus in accordance with triangular wave LFO.
•Parameters
0:LFO Rate (Range: 0 to 127) Adjusts the rate of the LFO.
1:LFO Depth (Range: 0 to 127) Adjusts the depth of the LFO.
2:Feedback(Range:
3:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
20:Stereo Delay 1•Function
This is delay of stereo input and output.
•Parameters
0:Delay Time (Range: 0 to 127) Adjusts the delay time.
1:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.
3:High Damp (Range: 0 to 127)
Adjusts damping of the
The smaller the value, the greater the damping of
4:Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.
5:Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.
21:Stereo Delay 2•Function
This is cross feedback delay of stereo input and output.
•Parameters
0:Delay Time (Range: 0 to 127) Adjusts the delay time.
1:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.
3:High Damp (Range: 0 to 127)
Adjusts damping of the
The smaller the value, the greater the damping of
4:Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.
5:Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.
22•Function
This is left/center/right
•Parameters
0:Delay Time (Range: 0 to 127) Adjusts the delay time.
1:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
2:Feedback (Range: 0 to 127) Adjusts the repeat of the delay.
3:High Damp (Range: 0 to 127)
Adjusts damping of the
The smaller the value, the greater the damping of
4:Ratio L (Range: 0 to 127)
Adjusts the delay time of the left channel. Proportional to the value set for Delay Time.
5:Ratio C (Range: 0 to 127)
Adjusts the delay time of the center channel. Proportional to the value set for Delay Time.
6:Ratio R (Range: 0 to 127)
Adjusts the delay time of the right channel. Proportional to the value set for Delay Time.
23:Gate Reverb•Function
This is a fader that creates artificial reverb that sounds like it is being cut with a gate.
•Parameters
0:LPF (Range: 0 to 127)
Adjusts the cutoff frequency of the
1:HPF (Range: 0 to 127)
Adjusts the cutoff frequency of the
2:Feedback (Range: 0 to 127) Adjusts the repeat of the reverb.
3:High Damp (Range: 0 to 127)
Adjusts damping of the
The smaller the value, the greater the damping of
4:Diffusion (Range: 0 to 127)
Provides fine adjustment of the reverb.
5:Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
6:Dry Level (Range: 0 to 127)
Adjusts the level of the original sound.
24:Reverse Gate Reverb•Function
This is gate reverb with a reverse rotation effect.
•Parameters
0:LPF (Range: 0 to 127)
Adjusts the cutoff frequency of the
1:HPF (Range: 0 to 127)
Adjusts the cutoff frequency of the
|